- When the wall is closed, there are no visible aluminium profiles
- Approximately 4 mm shadow gap between the closed panels
Specially developed aluminium frames and free-hanging exterior panels make the walls extremely sturdy and provide excellent sound insulation. The panel connections consist of vertical aluminium panel side profiles, E6/EV anodised.
The vertical aluminium profiles can also be colour coated as an option.
Cover panels - Standard Collection Only
The Multiwal moveable walls are faced with 16 mm high-quality chipboard V20E1/720.
These cover panels are suspended on the rubber profiles of the frame.
Due to the unique suspended construction, the cover panels can easily be replaced.
If required, MDF exterior panels can also be used.
Optional cover panels
- B1 low flammability
- A2 non-flammable
- B1 finishes
Aluminium track in standard colour RAL 9010. All other colours are available upon request.
Bearing rollers with high-quality roller technology have been specially developed for the Multiwal moveable walls. Combined with an ingenious aluminium track system, the panels can be easily moved.
Panel height adjustment
Panel height is fully adjustable without dismantling the main assembly. Disturbing the ceiling finish is not necessary to fine tune the panels.
Concave/convex aluminium profiles guarantee that the seal is effective and insulates properly. The solid and precise connection between the panels is achieved by means of strong, full height sound sealing strips located on the inner face.
Type Multi Eco 100 K is equipped with a manual
To obtain the best soundproofing effect, the wall must fit tightly against the floor and ceiling. To achieve this, the movable walls have a manual system used to extend the pressure seals, which have flexible rubber pads. The pressure seals naturally compensate for possible unevenness in the floor.
Each panel is fitted with black anodised pressure seals at the top and bottom. The compressive force of 1,5kN/m².
Multi Eco 100 K
Panel thickness 100 mm
Soundproofing: Rw, P 35, 41, 43, 45 and 47 dB
DIN EN 10140-2 / 20140-3, laboratory values
Surface weight 20 - 40 kg/m2, depending on the sound insulation
Multi-ECO 100K PDF Brochure